SMS/STC Smart Controller 6 Amp

Description
The SMS/STC Smart Controller is designed to keep the temperature in your room constant while constantly controlling airflow. Once you set the desired temperature, the Smart Controller automatically creates the perfect climate.

How does it work?
The Smart Controller uses our Motion Flow software system and therefore responds completely differently than most other controllers. When you first install the Smart Controller, it takes 5 -10 minutes to scan your room to determine the correct fan speed. After that, the controller knows exactly how fast your fan needs to run to keep the temperature constant. From then on, the Smart Controller will automatically adjust the fan speed to maintain the set temperature. The Smart Controller features 60 different speeds, allowing for seamless fan speed control and more precise temperature control than other controllers. This new technology not only guarantees extremely precise temperature control, but also ensures that the fan is less noisy and lasts longer. The Smart Controller is plug-and-play, so you don't need any cables. Simply connect the fan, set the desired temperature and the minimum fan speed, and the Smart Controller does the rest.

User Manual
* Insert the temperature sensor into the Smart#.
* Plug the Smart Controller into the wall socket.
* Place the temperature sensor in the middle of the room
* Connect your fan to the Smart Controller
* ##Set the desired minimum fan speed##
* Set the desired temperature
The Smart Controller will now scan the room. PLEASE WAIT! This may take 5 to 10 minutes! During the scan, the Smart Controller will run at 100% speed for a few seconds and then at the minimum speed. After 5 to 10 minutes, the controller will select the correct speed and no longer needs to be set manually. The Smart Controller will automatically adjust the speed as needed to maintain the temperature.

#Without a temperature sensor, the Smart acts as a manual fan controller#

##Minimum fan speed: this is the lowest speed at which your fan will run. The lower you set the speed, the
greater the range of your fan. We recommend setting the speed to the lowest setting. This will allow your fan to run at all possible speeds, from slow to top speed, in order to keep the temperature constant. If necessary, you can adjust the minimum speed according to the type of fan##

Caution!
Do not place the temperature sensor in the direct airflow of the fan. This may interfere with proper operation.
Connecting a fan greater than 5A/1000watt may cause permanent damage to the unit.
Damages or risks resulting from improper use of the device or use that is not
corresponds to the product specifications, are not covered by the warranty.